BKW B400095515 Motor Protection Switch

BKW B400095515 Replacement Part

Includes:

• (1) - Motor Protection Switch (B400095515)

Specifications

• Manufacturer: Siemens
• Model # 3RV2021-1CA10
• General technical data
• Size of the circuit-breaker S0
• Size of contactor can be combined company-specific S00, S0
• Product extension
• Auxiliary switch Yes
• Power loss [W] total typical 6 W
• Surge voltage resistance rated value 6 kV
• maximum permissible voltage for safe isolation
• in networks with grounded star point between
• main and auxiliary circuit
• 400 V
• in networks with grounded star point between
• main and auxiliary circuit
• 400 V
• Protection class IP
• on the front IP20
• of the terminal IP20
• Shock resistance
• acc. to IEC 60068-2-27 25g / 11 ms
• Mechanical service life (switching cycles)
• of the main contacts typical 100 000
• of auxiliary contacts typical 100 000
• Electrical endurance (switching cycles)
• typical 100 000
• Certificate of suitability
• according to ATEX directive 2014/34/EU DMT 02 ATEX F 001
• ATEX Yes
• Protection against electrical shock finger-safe
• Reference code acc. to DIN EN 81346-2 Q
• Ambient conditions
• Installation altitude at height above sea level
• maximum 2 000 m
• Temperature compensation -20 ... +60 °C
• Relative humidity during operation 10 ... 95 %
• Main circuit
• Number of poles for main current circuit 3
• Adjustable pick-up value current of the currentdependent
• overload release
• 1.8 ... 2.5 A
• Operating voltage
• rated value 690 V
• at AC-3 rated value maximum 690 V
• Operating frequency rated value 50 ... 60 Hz
• Operating current rated value 2.5 A
• Operating current
• at AC-3
• — at 400 V rated value 2.5 A
• Operating power
• at AC-3
• — at 230 V rated value 370 W
• — at 400 V rated value 750 W
• — at 500 V rated value 1 100 W
• — at 690 V rated value 1 500 W
• Operating frequency
• at AC-3 maximum 15 1/h
• Auxiliary circuit
• Number of NC contacts for auxiliary contacts 0
• Number of NO contacts for auxiliary contacts 0
• Number of CO contacts
• for auxiliary contacts 0
• Product function
• Ground fault detection No
• Phase failure detection Yes
• Trip class CLASS 10
• Design of the overload release thermal
• Operational short-circuit current breaking capacity
• (Ics) at AC
• at 240 V rated value 100 kA
• at 400 V rated value 100 kA
• at 500 V rated value 100 kA
• at 690 V rated value 10 kA
• Maximum short-circuit current breaking capacity (Icu)
• at AC at 240 V rated value 100 kA
• at AC at 400 V rated value 100 kA
• at AC at 500 V rated value 100 kA
• at AC at 690 V rated value 10 kA
• Breaking capacity short-circuit current (Icn)
• at 1 current path at DC at 150 V rated value 10 kA
• with 2 current paths in series at DC at 300 V
• rated value
• 10 kA
• with 3 current paths in series at DC at 450 V
• rated value
• 10 kA
• Response value current
• of instantaneous short-circuit trip unit 33 A
• UL/CSA ratings
• Full-load current (FLA) for three-phase AC motor
• at 480 V rated value 2.5 A
• at 600 V rated value 2.5 A
• Yielded mechanical performance [hp]
• for single-phase AC motor
• — at 230 V rated value 0.167 hp
• for three-phase AC motor
• — at 200/208 V rated value 0.5 hp
• — at 220/230 V rated value 0.5 hp
• — at 460/480 V rated value 1 hp
• — at 575/600 V rated value 1.5 hp
• Short-circuit protection
• Product function Short circuit protection Yes
• Design of the short-circuit trip magnetic
• Mounting position any
• Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
• according to DIN EN 60715
• Height 97 mm
• Width 45 mm
• Depth 97 mm

Country of Origin: Germany

Replaces Old BKW Part Numbers

• There are no older part numbers.

Other Part Numbers

SIEMENS, 3RV2021-1CA10, Sirius, B400095515, G/181214, *E02*, DMT02 ATEX F 001,

Fits Models:

(Press ctrl + F to find model number below.)

Various. (Call 734-326-3900 with your model and serial number for more information.)