Kanto-Seiki KAN08117 Replacement Part
- (1) - Fan Motor (Part Numbers: BP-60S-30D2)
- (1) - Fan Blade (Part Numbers: 65202511)
- (1) - Capacitor (Part Numbers: EN60252)
- Fan Motor:
- Manufacturer: Nidec Techno Motor Corporation
- Watts: 60
- Pull (Number of Leads): 4 (Includes Ground Wire)
- Amperage: 6
- Hertz: 50/60
- Phase: 1
- Class: E
- Fan Blade:
- Bore: 8mm
- Rotation: Clockwise Hub End
- Diameter: 31mm
- Number of Blades: 4
- Tolerance: + or - 10%
- Microfarad: 2.5
- Voltage: 450
- AFC: 10,000
- Hertz: 50/60
Note: Always check the fan blade on your fan assembly. Bad or unbalanced fan blades can cause premature motor failure due to vibration. If you are not sure what fan blade fits your fan assembly, call us at 734-326-3900.
To prevent premature motor failure, it is highly recommended you change your capacitor along with your motor. Capacitors out of tolerance can cause motors to overheat and prematurely fail. If you are unsure of what capacitor is required for your unit, please call us at 734-326-3900.
Replaces Old Kanto-Seiki Part Numbers:
- There are no older part numbers.
Other Part Numbers:
Kanto Seiki, KAN 08117, 65202511, TE 19, BP-60S2-30D2, 60W, 4P, 200V, 0. 6/0, 6A, 50/60Hz, 1Phase, Ins. Class E, Cos0, 0. 82/0. 99, IP23 2. 5uF, S1 1400/1630Min-1, IEC34-1 (1983), Nicec Techno Motor Corporation, 4NM3829, CTF 10, CMPS, SH-PO, EN60252, C22.2, No. 190, E.5uF, + or - 10%, 540V, 10000AFC, 25/85/21, 50/60Hz, Protected, AE 13 23
Fits Kanto-Seiki Oilmatic, Moldmatic Models:(Press ctrl + F to find model number below if you have any questions call 734-326-3900 for further information)
Various. (Call 734-326-3900 with your model and serial number for more information.)
If you have any questions or would like to confirm part fitment, please call us at (734) 326-3900 and speak with one of our technicians.