Lahntechnik Duotemp 112405 Circuit Breaker

Lahntechnik Duotemp 112405 Replacement Part

CALL (734) 326-3900 or SEND MESSAGE TO PARTS@TECHNICALHOTANDCOLD.COM FOR PRICE!

Includes:

• (1) - Circuit Breaker (112405)

Specifications

• Manufacturer: Siemens
• Model # 3RV2011-1CA20
• Type: 3RV2
• Size: S00
• ● Auxiliary switch Yes
• Power loss [W] total typical 6 W
• Insulation voltage with degree of pollution 3 rated
• value
• 690 V
• Surge voltage resistance rated value 6 kV
• maximum permissible voltage for safe isolation
• ● in networks with grounded star point between
• main and auxiliary circuit
• 400 V
• ● in networks with grounded star point between
• main and auxiliary circuit
• 400 V
• Protection class IP
• 3RV2011-1CA20 Subject to change without notice
• Page 1/
• 9
• 06/04/20
• ● on the front IP20
• ● of the terminal IP20
• Shock resistance
• ● acc. to IEC 60068-2-27 25g / 11 ms
• Mechanical service life (switching cycles)
• ● of the main contacts typical 100 000
• ● of auxiliary contacts typical 100 000
• Electrical endurance (switching cycles)
• ● typical 100 000
• Certificate of suitability ATEX Yes
• Protection against electrical shock finger-safe
• Reference code acc. to DIN EN 81346-2 Q
• Ambient conditions
• Installation altitude at height above sea level
• ● maximum 2 000 m
• Temperature compensation -20 ... +60 °C
• Relative humidity during operation 10 ... 95 %
• Main circuit
• Number of poles for main current circuit 3
• Adjustable pick-up value current of the currentdependent overload release
• 1.8 ... 2.5 A
• Operating voltage
• ● rated value 690 V
• ● at AC-3 rated value maximum 690 V
• Operating frequency rated value 50 ... 60 Hz
• Operating current rated value 2.5 A
• Operating current
• ● at AC-3
• — at 400 V rated value 2.5 A
• Operating power
• ● at AC-3
• — at 230 V rated value 370 W
• — at 400 V rated value 750 W
• — at 500 V rated value 1 100 W
• — at 690 V rated value 1 500 W
• Operating frequency
• ● at AC-3 maximum 15 1/h
• Auxiliary circuit
• Number of NC contacts for auxiliary contacts 0
• Number of NO contacts for auxiliary contacts 0
• Number of CO contacts
• 3RV2011-1CA20 Subject to change without notice
• Page 2/
• 9
• 06/04/2019 © Copyright Siemens
• ● for auxiliary contacts 0
• Protective and monitoring functions
• Product function
• ● Ground fault detection No
• ● Phase failure detection Yes
• Trip class CLASS 10
• Design of the overload release thermal
• Operational short-circuit current breaking capacity
• (Ics) at AC
• ● at 240 V rated value 100 kA
• ● at 400 V rated value 100 kA
• ● at 500 V rated value 100 kA
• ● at 690 V rated value 10 kA
• Maximum short-circuit current breaking capacity (Icu)
• ● at AC at 240 V rated value 100 kA
• ● at AC at 400 V rated value 100 kA
• ● at AC at 500 V rated value 100 kA
• ● at AC at 690 V rated value 10 kA
• Breaking capacity short-circuit current (Icn)
• ● at 1 current path at DC at 150 V rated value 10 kA
• ● with 2 current paths in series at DC at 300 V
• rated value
• 10 kA
• ● with 3 current paths in series at DC at 450 V
• rated value
• 10 kA
• Response value current
• ● of instantaneous short-circuit trip unit 33 A
• UL/CSA ratings
• Full-load current (FLA) for three-phase AC motor
• ● at 480 V rated value 2.5 A
• ● at 600 V rated value 2.5 A
• Yielded mechanical performance [hp]
• ● for single-phase AC motor
• — at 230 V rated value 0.167 hp
• ● for three-phase AC motor
• — at 200/208 V rated value 0.5 hp
• — at 220/230 V rated value 0.5 hp
• — at 460/480 V rated value 1 hp
• — at 575/600 V rated value 1.5 hp
• Short-circuit protection
• Product function Short circuit protection Yes
• Design of the short-circuit trip magnetic
• 3RV2011-1CA20 Subject to change without notice
• Page 3/
• 9
• 06/04/2019 © Copyright Siemens
• Design of the fuse link for IT network for short-circuit
• protection of the main circuit
• ● at 400 V gL/gG 25 A
• ● at 500 V gL/gG 25 A
• ● at 690 V gL/gG 20 A
• Installation/ mounting/ dimensions
• Mounting position any
• Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
• according to DIN EN 60715

Country of Origin: Germany

Replaces Old Lahntechnik Duotemp Part Numbers

• There are no older part numbers.

Other Part Numbers

3RV2011-1CA20, Siemens, Sirius, G/190415, *E02*, HW05014-18042, 02-3450-7110, Lahntechnik, DMT 02 ATEX F 001

Fits Models:

(Press ctrl + F to find model number below.)

Various. (Call 734-326-3900 with your model and serial number for more information.)